Diagnostics; Printing A Test Label - Avery Dennison Monarch 9419 Reference Manual

D I A G N O S T I C S
This chapter explains how to
♦ print diagnostics labels
♦ reset the printer
♦ call Technical Support.
Before calling Service, print a test label. The label contains information to help diagnose
mechanical and setup problems.
To clear an error, follow the directions on the printer: ESCAPE and correct the problem (reload
supply, etc.), then press SELECT to continue. If a formatting error occurs, the label prints; but
data may be missing. Correct the format or batch and resend them to the printer.
P r i n t i n g a T e s t L a b e l
The test labels represent the printer's ONLINE mode settings.
From the Main Menu select Diagnostics, then Test Label. Three test labels print:
Printer Information
Contains generic information, including
speed, contrast, and inch counts.
Network Configuration (optional)
Contains the printer's network/Ethernet
configuration.
MPCL Label
Contains the printer's MPCL packet
configuration. See Chapter 2, "Configuring
the Printer" for more information.
7

Diagnostics 7-1