Printing Test Labels; Printing A Checkerboard Label; Printing A Gray Scale Label; Printing A Serial Quality Label - Avery Dennison Pathfinder 6059 Equipment Manual

P r i n t i n g T e s t L a b e l s
Several test label options are available in the Printer Setup
Application. Before you run these tests, load the supply in Non-Peel
mode.

Printing a Checkerboard Label

Select Energy, then Print Checkerboard Label. This label verifies
the printhead strobes are working.
If the printed sample has fewer lines or no lines, keep the sample and
call Technical Support.
Printing a Gra y Scale Label
Select Energy, then Print Gray Scale Label. This label checks the
uniformity of the printing. The printed sample should be uniformly
gray across the supply.
If you see voids, especially on the edges, keep the sample and call
Technical Support.

Printing a Serial Quality Label

Label w ith voids
Select Energy, then Print Serial Quality Label. This label prints serial bar codes for you to
scan to check the quality of serial bar codes.

Printing a Parallel Quality Label

Select Energy, then Print Parallel Quality Label. A label prints parallel bar codes for you to
scan to check the quality of parallel bar codes.
Classification: Avery Dennison – Public Printing Labels 3-3