Figure 37: Wlan Global Configuration - D-Link DWC-1000 User Manual

Wireless Controller

Figure 37: WLAN global configuration

IP Address: This field shows the IP address of the WLAN interface on the controller.
If the controller does not have the Routing Package installed, or if routing is disabled,
the IP address is the network interface. If the routing package is installed and enabled,
this is the IP address of the routing or loopback i nterface you configure for the
controller features.
AP MAC Validation Method: Add the MAC address of the AP to the Valid AP
database, which can be kept locally on the controller or in an external RADIUS server.
When the controller discovers an AP that is not managed by another ccontroller, it
looks up the MAC address of the AP in the Valid AP database. If it finds the MAC
address in the database, the controller validates the AP and assumes management.
Select the database to use for AP validation and, optionally, for authentication if the
Require Authentication Passphrase option is selected.
64
User Manual