Configuration; Ethernet Connection - D-Link Nuclias Connect Hub Plus DNH-200 User Manual

Nuclias Connect Hub Plus User Manual

Configuration

Note: D-Link recommends manual configuration of the DNH-200 before mounting it onto the
rack. The management computer, DHCP server, and DNH-200 must be in the same network.

Ethernet Connection

You need the following equipment to access the web interface of the DNH-200:
• A PC with a RJ-45 Ethernet connection
• An Ethernet cable
• A power adapter
1. Pull out the hard disk tray of the DNH-200 device.
2. Insert a 2.5-inch hard disk into the tray and secure the HDD with the supplied screws.
3. Reinsert tray back into the device.
9
Hardware Installation