Figure 115: Igmp Setup - D-Link DWC-1000 User Manual

Wireless Controller
Advanced > Advanced Network > IGMP Setup
Active IGMP snooping is referred to as IGMP proxy. When in use IGMP packets
through the LAN are filtered in order to reduce the amount of multicast traffic in the
network..

Figure 115: IGMP Setup

Enable IGMP Proxy: Check this to enable IGMP proxy on this LAN
Allowed Network Addresses: All the IP network addresses/host addresses of the
multicast sources are listed here.
Network Address: The IP network or the host address of the multicast source.
Mask Length: The length of the subnet mask.
The following actions are supported from this page :
Add: To add a network/host address along with mask length.
Edit: To edit a network/host address along with mask length.
Delete: To delete a network/host address along with mask length..
204
User Manual