Figure 88: Add A Valid Access Point - D-Link DWC-1000 User Manual

Wireless Controller
The following actions are supported from this page:
Edit: To edit AP details in Valid AP page.
Delete: To delete a valid AP provide valid MAC address in Valid AP page.
Add: To add an AP in Valid AP page.

Figure 88: Add a Valid Access Point

MAC Address: This field shows the MAC address of the AP. To change this field,
you must delete the entire Valid AP configuration and then enter the correct MAC
address from the page that lists all Valid APs.
AP Mode: You can configure the AP to be in one of three modes:

Standalone: The AP acts as an individual access point in the network. You do
not manage the AP by using the controller. Instead, you log on to the AP itself
and manage it by using the Administrator Web User Interface (UI), CLI, or
154
User Manual