Active Vpn Tunnels - D-Link DWC-1000 User Manual

Wireless Controller
Age: Time since any event has been received for this client that updated the detected
client database entry.
Create Time: Time since this entry was first added to the detected clients database.

4.5.4 Active VPN Tunnels


The following feature is available upon licensed activation of VPN / Firewall
features for the system.
Status > Active VPNs
You can view and change the status (connect or drop) of the controllers IPsec security
associations. Here, the active IPsec SAs (security associations) are listed along with
the traffic details and tunnel state. The traffic is a cumulative measure of
transmitted/received packets since the tunnel was established.
If a VPN policy state is "IPsec SA Not Established", it can be enabled by clicking the
Connect button of the corresponding policy. The Active IPsec SAs table displays a
list of active IPsec SAs. Table fields are as follows.
Policy Name: IKE or VPN policy associated with this SA.
Endpoint: IP address of the remote VPN gateway or client.
Tx (KB): Kilobytes of data transmitted over this SA.
Tx (Packets): Number of IP packets transmitted over this SA.
State: Status of the SA for IKE policies: Not Connected or IPsec SA Established.
Action: Click Connect to establish an inactive SA (connection) or Disconnect to
terminate an active SA (connection).
116
User Manual