Wireless Controller
8.22 wlan client delete <macaddr>
S.No Com mand Nam e
1
<macaddr>
8.23 wlan global dist_tunnel configure
S.No Com mand Nam e
1
save
2
exit
3
cancel
4
max_clients
5
idle_timeout
6
max_timeout
7
mcast_reply
8.24 wlan global snmp_trap configure
S.No Com mand Nam e
1
save
2
exit
3
cancel
4
ap_failure
5
ap_state
6
client_failure
7
client_state
8
peer_w s
9
rf_scan
10
rogue_ap
11
tspec
12
w ids_status
13
w s_status
8.25 wlan global configure
S.No Com mand Nam e
Description
w lan client configuration mode
Description
Save Distributed Tunneling settings.
Save Distributed Tunneling settings and exit
current mode.
Roll back Distributed Tunneling settings
changes.
Enter maximum client connections supported.
Enter idle timeout value in seconds.
Enter maximum timeout value in seconds
Enter maximum multicast relplications
allow ed.
Description
Save SNMP Trap settings.
Save SNMP Trap settings and exit current
mode.
Roll back SNMP Trap settings changes.
Enable/Disable SNMP traps for AP
association/authentication failures.
Enable/Disable SNMP traps for AP state
changes.
Enable/Disable SNMP traps for client
association/authentication failures.
Enable/Disable SNMP traps client state
changes
Enable/Disable SNMP traps for peer w lan
sw itch events.
Enable/Disable SNMP traps for RF scan
related events.
Enable/Disable SNMP traps for rogue access
points.
Enable/Disable SNMP traps for TSPEC
related events.
Enable/Disable SNMP traps for WIDS status
events.
Enable/Disable SNMP traps for ws status
events
Description
47
CLI Reference Guide
Type and Description
MAC address
AA:BB:CC:DD:EE:FF w here
each part is in the range 00-
FF
Type and Description
Unsigned integer
Unsigned integer
Unsigned integer
Unsigned integer
Type and Description
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Type and Description
Need help?
Do you have a question about the DWC-1000 and is the answer not in the manual?