D-Link DWC-1000 User Manual page 131

Wireless controller
Hide thumbs Also See for DWC-1000:
Table of Contents

Advertisement

Wireless Controller
User Manual
as enabled, but is operationally disabled due to configuration dependencies. If the
operational status is disabled, the reason will be displayed in the following status field.
IP Address: IP address of the controller.
Peer Controller: Number of peer WLAN controllers detected on the network.
Cluster Controller: Indicates whether this controller is the Cluster Controller for the
cluster.
Cluster Controller IP Address: The IP address of the peer controller that is the
Cluster Controller.
Total Access Points: Total number of Managed APs in the database. This value is
always equal to the sum of Managed Access Points, Connection Failed Access Points,
and Discovered Access Points.
Managed Access Points: Number of APs in the managed AP database that are
authenticated, configured, and have an active connection with the controller.
Standalone Access Points: Number of trusted APs in Standalone mode. APs in
Standalone mode are not managed by a controller.
Rogue Access Points: Number of Rogue APs currently detected on the WLAN. When
an AP performs an RFscan, it might detect access points that have not been va lidated. It
reports these APs as rogues.
Discovered Access Points: APs that have a connection with the controller, but haven't
been completely configured. This value includes all managed APs with a Discovered or
Authenticated status.
Connection Failed Access Points: Number of APs that were previously authenticated
and managed, but currently don't have connection with the Unified Controller.
Authentication Failed Access Points: Number of APs that failed to establish
communication with the Unified Controller.
Unknown Access Points: Number of Unknown APs currently detected on the WLAN.
If an AP configured to be managed by the Unified Controller is detected through an RF
scan at any time that it is not actively managed it is classified as an Unknown AP.
Rogue AP Mitigation Limit: Maximum number of APs for which the system can send
de-authentication frames.
130

Advertisement

Table of Contents
loading

Table of Contents