Wireless Controller
Figure 184: POP3 Server Configuration
Authentication Server 1: The IP Address of the primary authentication server.
Authentication Server 2: The IP Address of the secondary authentication server; it is
an optional field.
Authentication Server 3: The IP Address of the tertiary authentication server; it is an
optional field.
Authentication Port: Authentication port for respective authentication server.
SSL Enable: Enable SSL support for POP3. If this option is enabled, it is mandatory
to select a certificate authority for it.
CA File: Certificate Authority file to verify POP3 server's certificate.
Timeout: Set the amount of time in seconds, the appliance should wait for a response
from the authentication server.
Retries: The number of attempts the appliance will make to the authentication server
before giving and considering the authentication attempt as failed.
319
User Manual