D-Link DWC-1000 User Manual page 40

Wireless Controller
User Manual
identifiers. LAN ports can be assigned unique VLAN IDs so that traffic to and from
that physical port can be isolated from the general LAN. VLAN filtering is particularly
useful to limit broadcast packets of a device in a large network
VLAN support is disabled by default in the controller. In the VLAN Configuration page,
enable VLAN support on the controller and then proceed to the next section to define
the virtual network.
Setup > VLAN Settings > Available VLAN
The Available VLAN page shows a list of configured VLANs by name and VLAN ID.
A VLAN membership can be created by clicking the Add button bel ow the List of
Available VLANs.
A VLAN membership entry consists of a VLAN identifier and the numerical VLAN ID
which is assigned to the VLAN membership. The VLAN ID value can be any number
from 2 to 255. VLAN ID 1 is reserved for the default VLAN, which is used for untagged
frames received on the interface. By enabling Inter VLAN Routing, you will allow
traffic from LAN hosts belonging to this VLAN ID to pass through to other configured
VLAN IDs that have Inter VLAN Routing enabled.
39