Wireless Controller
4.8.2 Associated Client Status
Status > Wireless Client Info> Associated Clients > Status
You can view a variety of information about the wireless clients that are associated
with the APs the controller manages.
MAC Address: The Ethernet address of the client station. If the MAC address is
followed by an asterisk (*), the client is associated with an AP managed by a peer
controller.
AP MAC Address: The Ethernet address of the AP.
SSID: The network on which the client is connected.
BSSID: The Ethernet MAC address for the managed AP VAP where t his client is
associated.
Detected IP Address: Identifies the IPv4 address of the client, if available .
Figure 80: Associated Client Status
The following actions are supported from this page :
143
User Manual
Need help?
Do you have a question about the DWC-1000 and is the answer not in the manual?
Questions and answers