Manual Management; Figure 95: Ap Provisioning Summary Status - D-Link DWC-1000 User Manual

Wireless Controller

Figure 95: AP Provisioning Summary Status

The following actions are supported from this page:
Delete: Remove the selected AP from the AP provisioning list.
Delete All: Remove all APs from the AP provisioning list.
Provision: Initiate provisioning for the selected AP. You can provision an AP only
from the cluster controller. After the AP is provisioned, it should become managed
by the controller with the configured Primary IP Address and appear in the AP
provisioning database as a managed AP.
Edit: Edit the parameters of selected AP from the AP provisioning list
Refresh: Updates the page with the latest information
5.6

Manual Management

Setup > AP Management > Manual Management
When the AP is in Managed mode, remote access to the AP is disabled. From the
Manual Management page, you can also manually change the RF channel and power
for each radio on an AP. The manual power and channel changes override the settings
169
User Manual