Chapter 10. Advanced System Functionalities; Usb Device Setup - D-Link DWC-1000 User Manual

Wireless Controller
Chapter 10. Advanced System
Functionalities

10.1 USB Device Setup

Setup > USB Settings > USB Status
The DWC-1000 Wireless controller has a USB interface for printer access, file sharing.

USB Mass Storage: also referred to as a "share port", files on a USB disk connected
to the DWC can be accessed by LAN users as a network drive.

USB Printer: The DWC can provide the LAN with access to printers connected
through the USB. The printer driver will have to be installed on the LAN host and
traffic will be routed through the DWC between the LAN and printer.
To configure printer on a Windows machine, follow below given steps:
1. Click 'Start' on the desktop.
2. Select 'Printers and faxes' option.
3. Right click and select 'add printer' or click on 'Add printer' present at the
left menu.
4. Select the 'Network Printer' radio button and click next (select "device isn't
listed in case of Windows7").
5. Select the 'Connect to printer using URL' radio button ('Select a shared
printer by name 'in case of Windows 7) and give the following URL http://<
controller's LAN IP address>:631/printers/<Model Name> (Model Name can
be found in the USB status page of controller's GUI).
6. Click 'next' and select the appropriate driver from the displayed list.
7. Click on 'next' and 'finish' to complete adding the printer.
282
User Manual