Ap Provisioning Summary; Figure 94: Local Oui Database - D-Link DWC-1000 User Manual

Wireless Controller
user-defined OUIs. The local list is searched first, so the same OUI can be located in
the local list as well as the read-only list.
OUI Value: Enter the OUI that represents the company ID in the format XX:XX:XX
where XX is a hexadecimal number between 00 and FF. The first three bytes of the
MAC address represents the company ID assignment.

The first byte of the OUI must have the least significant bit set to 0. F or
example 02:FF:FF is a valid OUI, but 03:FF:FF is not .
OUI Description: Enter the organization name associated with the OUI. The name
can be up to 32alphanumeric characters..

Figure 94: Local OUI Database

5.5

AP Provisioning Summary

Setup > AP Management > AP Provisioning Summary Status
The AP Provisioning feature helps you add new APs to an existing controller cluster.
With AP Provisioning, you can configure the access points with parameters that are
needed to connect to the wireless network. Use AP Provisioning to connect devices
to a network enabled for mutual authentication. If a network is not enabled for mutual
authentication then APs can be attached to the network by properly configuring the
167
User Manual