D-Link DWC-1000 User Manual page 44

Wireless Controller
Setup > VLAN Settings > Port VLAN
VLAN membership properties for the LAN and wireless LAN are listed on this pa ge.
The VLAN Port table displays the port identifier, the mode setting for that port and
VLAN membership information. The configuration page is accessed by selecting one
of the four physical ports or a configured access point and clicking Edit.
The edit page offers the following configuration options:

Mode: The mode of this VLAN can be General, Access, or Trunk. The
default is access.

In General mode the port is a member of a user selectable set of VLANs.
The port sends and receives data that is tagged or untagged with a VLAN ID.
If the data into the port is untagged, it is assigned the defined PVID. In the
configuration from Figure 6, Port 3 is a General port with PVID 3, so
untagged data into Port 3 will be assigned PVID 3. All tagg ed data sent out
of the port with the same PVID will be untagged. This is mode is typically
used with IP Phones that have dual Ethernet ports. Data coming from phone
to the controller port on the controller will be tagged. Data passing through
the phone from a connected device will be untagged.
43
User Manual