Wireless Controller
SSID: Service Set ID of the network, which is broadcast in the detected beacon
frame.
Physical Mode: Indicates the 802.11 mode being used on the AP.
Channel: Transmit channel of the AP.
Status: Indicates the managed status of the AP, whether this is a valid AP known to
the controller or a Rogue on the network. The valid values are:
Managed: The neighbor AP is managed by the wireless system.
Standalone: The AP is managed in standalone mode and configured as a valid
AP entry (local or RADIUS).
Rogue: The AP is classified as a threat by one of the threat detection
algorithms.
Unknown: The AP is detected in the network but is not classified as a threat
by the threat detection algorithms.
Age: Time since this AP was last detected in an RF scan. Status entries for the RF
Scan Status page are collected at a point in time and eventually age out. The age
value for each entry shows how long ago the controller recorded the entry.
126
User Manual