Figure 69: Authentication Failure Status - D-Link DWC-1000 User Manual

Wireless Controller










Figure 69: Authentication Failure Status

No Database Entry: The MAC address of the AP is not in the local Valid
AP database or the external RADIUS server database, so the AP has not
been validated.
Local Authentication: The authentication password configured in the
AP did not match the password configured in the local database.
Not Managed: The AP is in the Valid AP database, but the AP Mode in
the local database is not set to Managed.
RADIUS Authentication: The password configured in the RADIUS
client for the RADIUS server was rejected by the server.
RADIUS Challenged: The RADIUS server is configured to use the
Challenge-Response authentication mode, which is incompatible with
the AP.
RADIUS Unreachable: The RADIUS server that the AP is configured
to use is unreachable.
Invalid RADIUS Response: The AP received a response packet from the
RADIUS server that was not recognized or invalid.
Invalid Profile ID: The profile ID specified in the RADIUS database
may not exist on the controller. This can also happen with the local
database when the configuration has been received from a peer
controller.
Profile Mismatch•-Hardware Type: The AP hardware type specified in
the AP Profile is not compatible with the actual AP hardware.
124
User Manual