Snmp Trap - D-Link DWC-1000 User Manual

Wireless Controller
AP automatically reduces the maximum segment size for all TCP connections to fit within
the tunnel.
Cluster Priority: Specify the priority of this controller for the Cluster Controller
election. The controller with highest priority in a cluster becomes the Cluster Controller.
If the priority is the same for all controllers, then the controller with lowest IP address
becomes the Cluster Controller. A priority of 0 means that the controller cannot become
the Cluster
AP Client QoS: Enable or disable the client QoS feature. If AP Client QoS is disabled,
the Client QoS configuration remains in place, but any ACLs or DiffServ policies applied
to wireless
The Client QoS feature extends the primary QoS capabilities of the Unified Wireless
controller to the wireless domain. More specifically, access control lists (ACLs) and
differentiated service (DiffServ) policies are applied to wireless clients associate d to the
Apothem maximum MTU size of existing network infrastructure which is set up to
controller and route 1518 (1522-tagged) byte frames. If you increase the tunnel IP MTU
size, you must also increase the physical MTU of the ports on which the traffic f lows.

11.2 SNMP Trap

Advanced > Global > General
Traps are asynchronous notifications sent from the SNMP agent to a SNMP manager.
Traps allow an agent to notify the management station of significant events by way of
an unsolicited SNMP message. The device can act as an agent and can send
asynchronous notification when certain events happen .
DWC-1000 supports both public and private traps:

Public traps include traps specified in RFC-1215. Details are in the SNMPv2 -
MIB.txt MIB file available with the DWC -1000 firmware. Example: the
coldStart trap comes under snmpTraps which is having value 1.

Private traps mainly consist of wireless traps. Details are in the dlinkwlan.mib
file. Example: the wsClientAssociationDetected trap comes under wsTraps
which having value 20.
Controller. The
traffic
291
highest possible
are
User Manual
priority is 255.
not enforced.