Snmp Traps; Figure 188: Snmp System Information For This Controller - D-Link DWC-1000 User Manual

Wireless Controller
Figure 188: SNMP system information f or this controller

12.4 SNMP Traps

Advanced > Global > SNMP Traps
If you use Simple Network Management Protocol (SNMP) to manage the DWC-1000
wireless controller, you can configure the SNMP agent on the controller to send traps
to the SNMP manager on your network. When an AP is managed by a controller, it does
not send out any traps. The controller generates all SNMP traps based on its own events
and the events it learns about through updates from the APs it manage s.
324
User Manual