Qos; Lan Qos Configuration; P Priority (Cos To Port Mapping); Figure 11: Lan Qos Configuration - D-Link DWC-1000 User Manual

Wireless Controller
2.2

QoS

2.2.1 LAN QoS Configuration

Setup > QoS > LAN QoS > Trust Mode Configuration
Enabling QoS on LAN is an advanced configuration, which is required only if you
expect congestion on the traffic on the LAN ports. This page allows you to enable QoS
and configure each port to trust a CoS or DSCP values in the packet.

Figure 11: LAN QoS Configuration

LAN Port: This list out the available LAN ports
Classify Using: This provide the list of QoS services available on the port

2.2.2 801.P Priority (CoS to Port Mapping)

Setup > QoS > 801.P Priority
Port CoS Mapping enables you to change the priority of the PCP value .
30
User Manual