Associating Vlans To Ports - D-Link DWC-1000 User Manual

Wireless Controller
by front desk user can login from this VLAN. Administrator can create front desk user
and front desk user will login to front desk page and he will generate Temporary users.
Only Temporary users created by front desk user are allowed to access data outside
VLAN
Enable Redirect: Selecting this option will enable redirection for captive portal user
after login to the captive portal page successfully.
Permanent User, and Temporary User types. For the SLA type, the user will be
redirected to the SLA page or the logout page based on the user agreement on the re -
directed page.
URL: This field accepts the redirection URL if 'Enable Redirect' is selected. This is
the site that the user will be taken to after success portal login.
Authentication Server: This lists the available authentication servers among which
one can be selected for this VLAN. All users login into the captive portal for this
VLAN are authenticated through the selected server. This option appears only if
Captive Portal type is selected as Permanent user. The list of available authentication
servers is Local User Database, RADIUS Server, LDAP Server and POP3. Whenever
a Permanent user tries to login to the captive po rtal the user will be authenticated
based on the Authentication server type selected by the admin while configuring
VLAN.
Authentication Type: This option is available for RADIUS authentication servers.
The available authentication types are PAP/CHAP/MSCHA P/MSCHAPV2. Based on
Authentication type configured by the admin in VLAN, the portal user will be
authenticated.
Captive Portal Profile: The configured and available captive portal login profiles are
shown here. Any of the available profiles can be used fo r the configuring VLAN.
Create a profile: This is a link to create a new captive Portal Login profile. Upon
clicking the link the admin will be taken to the configuration page to create new login
profile and configure the VLAN with that profile.

2.3.2 Associating VLANs to ports

In order to tag all traffic through a specific LAN port with a VLAN ID, you can
associate a VLAN to a physical port.
This is available for SLA,
42
User Manual