Wireless Controller
Figure 5: LAN DHCP Leased Clients
IP Addresses: The LAN IP address of a host that matches the reserved IP list.
MAC Addresses: The MAC address of a LAN host that has a c onfigured IP address
reservation.
2.1.3 LAN DHCP Pools
Setup > Network Settings > LAN DHCP Pools
Upon enabling DHCP, you can define a set of IP ranges (referred to as "pools") from
which to assign LAN clients IP addresses. Each LAN on the router can sub -divded
into 8 pools. The subnet and network of each pool must be within that of the LAN,
configured on the LAN Settings page. Most importantly, pool IP addresss must not
overlap on another.
New LAN DHCP clients will be assigned IP addresses starting with the "Start" IP
address in the first pool in the list of pools. Clients will continue to receive se quential
IP addresses until the "End" IP address of the first pool. Then, if further pools are
configured, the next LAN client to join the domain of this router will receive the
"Start" IP address of the second configured pool, and so on.
22
User Manual