D-Link DWC-1000 User Manual page 169

Wireless Controller
local Valid AP database or RADIUS AP database and discovery options. The
provisioning feature can optionally be used on networks not enabled for mutual
authentication to simplify AP attachment to the cluster.
MAC Address: MAC address of the AP
IP Address: IP Address of the AP.
Primary IP Address: The IP address of the primary provisioned controller as reported
by the AP.
Backup IP Address: The IP address of the backup provisioned controller as reported
by the AP.
New Primary IP Address: Enter the IP address of primary controller to which the
AP should try to connect.
New Backup IP Address: Enter the IP address of controller to which the AP should
try to connect if it is unable to connect to the primary controller.
Status: Status of the most recently issued AP provisioning command, which has one
of the following values:

Not Started: Provisioning has not been started for this AP.

Success: Provisioning finished successfully for this controller. The AP
Provisioning Status table should reflect the latest provisioning configuration.

In Progress: Provisioning is in progress for this AP.

Invalid Controller IP Address: Either primary or backup controller IP
address is not in the cluster or the mutual authentication mode is enabled a nd
the primary controller IP address is not specified.

Provisioning Rejected: AP is not managed and is configured not to accept
provisioning data in unmanaged mode.

Timed Out: The last provisioning request timed out.
168
User Manual