D-Link DWC-1000 User Manual page 314

Wireless Controller
User Manual
After configuring NT Domain Settings, users in to the configured domain are able to
authenticate. The following fields needs to be configured in NT Domain configuration.
Authentication Server 1: The IP Address of the primary authentication server.
Authentication Server 2: The IP Address of the secondary authentication server; it is
an optional field.
Authentication Server 3: The IP Address of the tertiary authentication server; it is an
optional field.
Workgroup: This is the Workgroup for Authentication Server 1.The NT domain type
of authentication requires the workgroup field; contact your administrator for the
workgroup needed to configure NT Domain authentication.
Second Workgroup: Workgroup for Authentication Server 2. Though it is optional, if
Authentication Server2 is defined this field becomes necessary.
Third Workgroup: Workgroup for Authentication Server 3. Though it is optional, if
Authentication Server2 is defined this field becomes necessary.
313