D-Link DWC-1000 User Manual page 289

Wireless Controller
User Manual
separated list of Option host addresses that are to be all owed access to the Local Server
(LAN Host).
Option Host Addresses: The user must provide a comma separated list of Option IP
addresses that must be allowed access to the Local Server in case he has selected
"Specify Option IPs" in the Drop down menu. Only commas are allowed and there
should be no spaces between the comma and the IP address
Internal IP Address: The user must provide a single IP address of the LAN host (Local
Server).
Enable Intel® AMT Reflector: Check this box to reflect back the data on selected
ports to the client initiating the connection.
Redirect to Port 16992: Check this box to redirect to port 16992 of the client initiating
the connection.
Listen on Port: Enter the port on which server should listen for incoming connections.
Redirect to Port 16993: Check this box to redirect to port 16993 of the client initiating
the connection.
Listen on Port: Enter the port on which server should listen for incoming connections.
Redirect to Port 16994: Check this box to redirect to port 16994 of the client initiating
the connection.
Listen on Port: Enter the port on which server should listen for incoming connections.
Redirect to Port 16995: Check this box to redirect to port 16995 of the client initiating
the connection.
Listen on Port: Enter the port on which server should listen for incoming connections.
Redirect to Port 9971: Check this box to redirect to port 9971 of the client initiating
the connection.
Listen on Port: Enter the port on which server should listen for incoming connections.
288