Configuration Commands Under Branch Wlan; Wlan Ap_Management Manual Configure <Macaddr - D-Link DWC-2000 Cli Reference Manual

56 net port-vlan edit <portname>
57 net vlan-membership
58 net vlan-membership edit <port>
59 net multivlan
60 net multivlan subnet
net multiVlan subnet
61
edit <vlanID>
62 net vlan
63 net vlan config
64 net vlan config add <vlan_id>
65 net vlan config edit <vlan_Id>
66 net vlan config delete <VlanId>
67 net vlan config enable
68 net vlan config disable
2.0

Configuration commands under branch WLAN

2.1 wlan ap_management manual configure <macaddr>
S.No Command Name Description
1 <macaddr>
2 save
3 cancel
4 exit
5 radio
6 channel
7 power
wlan ap_management
manual configuration mode.
Save ap management
configuration changes.
Roll back ap management
configuration changes.
Save ap management
configuration changes and
current mode.
Configure radio on a
managed access points.
Configure managed access
points channel value.
Enter the transmit power.
vlan port name range 1-
4 .
vlan-membership.
Net vlan membership
for the port.
Multivlan server
configure.
Multivlan Server
configure.
Multivlan server edit
mode.
vlan Configuration
Changes.
vlan configuration .
Add a vlan.
Edit a configured vlan.
Delete a vlan.
Enable vlan.
configuration.
Disable vlan
configuration.
Type and Description
MAC address
AA:BB:CC:DD:EE:FF where each
part is in the range 00-FF
Wireless radio interface
Unsigned integer
Range of power percentage
35