Wireless Controller
User Manual
Rogue Detected Trap Interval: Specify the interval, in seconds, between
transmissions of the SNMP trap telling the administrator that rogue APs are present
in the RF Scan database. If you set the value to 0, the trap is never sent.
Wired Network Detection Interval: Specify the number of seconds that the AP
waits before starting a new wired network detection cycle. If you set the value to 0,
wired network detection is disabled
AP De-Authentication Attack: Enable or disable the AP de-authentication attack.
The wireless controller can protect against rogue APs by sending DE authentication
messages to the rogue AP. The de-authentication attack feature must be globally
enabled in order for the wireless system to do this function. Make sure that no
legitimate APs are classified as rogues before enabling the attack feature. This
feature is disabled by default.
301