Figure 158: List Of Ssl Vpn Polices (Global Filter) - D-Link DWC-1000 User Manual

Wireless Controller

Figure 158: List of SSL VPN polices (Global filter)

To add a SSL VPN policy, you must first assign it to a user, group, or make it global
(i.e. applicable to all SSL VPN users). If the policy is for a group, the availab le
configured groups are shown in a drop down menu and one must be selected. Similarly,
for a user defined policy a SSL VPN user must be chosen from the available list of
configured users.
The next step is to define the policy details. The policy name is a unique identifier for
this rule. The policy can be assigned to a specific Network Resource (details follow in
the subsequent section), IP address, IP network, or all devices on the LAN of the
controller. Based on the selection of one of these four option s, the appropriate
configuration fields are required (i.e. choosing the network resources from a list of
defined resources, or defining the IP addresses). For applying the policy to addresses
the port range/port number can be defined.
The final steps require the policy permission to be set to either permit or deny access
to the selected addresses or network resources. As well the policy can be specified for
one or all of the supported SSL VPN services (i.e. VPN tunnel)
270
User Manual