Linker Command-Line Files - Analog Devices VisualDSP++ 3.5 Manual

Linker Command-Line Files

Linker command-line files (
command-line input for the linker. For more information on the linker
command line, see the VisualDSP++ 3.5 Linker and Utilities Manual for
16-Bit Processors.
Build Files
Build files are produced by the VisualDSP++ development tools while
building a project. This section describes the following build file formats:
• "Assembler Object Files" on page A-5
• "Library Files" on page A-6
• "Linker Output Files" on page A-6
• "Memory Map Files" on page A-7
• "Loader Output Files in Intel Hex-32 Format" on page A-7
• "Splitter Output Files in ASCII Format" on page A-9
Assembler Object Files
Assembler output object files (
files (ELF). Object files contain relocatable code and debugging informa-
tion for a DSP program's memory segments. The linker processes object
files into an executable file (
ELF format, see the
VisualDSP++ Loader Manual
for 16-Bit Processors
) are ASCII text files that contain
.TXT
) are binary, executable and linkable
.DOJ
). For information on the object file's
.DXE
"Format References" on page
File Formats
A-10.
A-5