File Searches; File Extensions - Analog Devices VisualDSP++ 3.5 Manual

where:
•
sourcefile
into a single boot-loadable or non-bootable file. An input file name
can include the drive and directory. For multiprocessor or multiin-
put systems, specify multiple input
in the order in which you want the loader to process the files.
Enclose long file names within straight-quotes,
•
-proc processor
ADSP-BF531
processor part number for every input
cessor systems. If the processor is not specified, the default is
ADSP-BF535
•
-switch
select operations and modes for the loader.
!
Command-line switches may be placed on the command line in
any order, except the order of input files for a multiinput system.
For a multiinput system, the loader processes the input files in the
order presented on the command line.

File Searches

File searches are important in the loader processing. The loader supports
relative and absolute directory names, default directories. File searches
occur as described

File Extensions

Some loader switches take a file name as an optional parameter.
lists the expected file types, names, and extensions.
VisualDSP++ Loader Manual
for 16-Bit Processors
Blackfin Processor Loader/Splitter
—Name of the executable file (
—Part number of the processor (for example,
) for which the loadable file is to be built. Provide a
.
...—One or more optional switches to process. Switches
on page 1-9.
) to be processed
.DXE
s. Put the input filenames
.DXE
"long file name"
if designing multipro-
.DXE
.
Table 2-8
2-41