Analog Devices VisualDSP++ 3.5 Manual page 80

Blackfin Processor Loader Guide
-kb
-kf
Figure 2-15. ADSP-BF53x Processors: Boot Kernel Pane
3. Select Use boot kernel. By default, this option is selected for
ADSP-BF535 and grayed out for ADSP-BF531/BF532/BF533 and
ADSP-BF561 processors.
4. If you want to produce two output files (boot kernel file and appli-
cation code file), select the Output kernel in separate file check
box. This option boots the second-stage loader from one source
and the application code from another source. If the Output kernel
in separate file box is selected, you can specify the kernel output
file options such as the Boot mode (source), Boot format, and
Output width.
2-50 VisualDSP++ Loader Manual
for 16-Bit Processors
-o2
-kp #
-kwidth
-l filename