Two-Processor Command Line - Analog Devices VisualDSP++ 3.5 Manual

•
-o outputfile
guage header file (
•
-proc ADSP-2192
produce an output file for the ADSP-2192 processor.
•
-switch...
Command-line switches may be placed in any order.

Two-Processor Command Line

Use the following syntax for the loader's command line when there are
two input executables (
elfloader -core0 sourcefile0 -core1 sourcefile1 -proc ADSP-2192
[-switch...]
where:
•
-core0 sourcefile0
to process for core 0. The loader creates the array and structure
names according to the supplied core number. Before running the
loader, ensure that all
directory as the executables. The loader automatically opens the
overlay and shared memory files to read in the data while process-
ing the executables.
•
-core1 sourcefile1
to process for core 1. The loader utility creates the array and struc-
ture names according to the supplied core number.
•
-proc ADSP-2192
for the ADSP-2192-12 processor. By default, the output file is a
C-language header file (
•
-switch...
Command-line switches may be placed in any order.
VisualDSP++ Loader Manual
for 16-Bit Processors
—Optional name of the loader's output, a C-lan-
).
.H
—The mandatory switch directs the loader to
—One or more optional switches to pass to the loader.
).
.DXE
—Identifies the
and
.OVL
—Identifies the
—The mandatory switch produces an output file
).
.H
—One or more optional switches to pass to the loader.
ADSP-2192-12 DSP Loader
sourcefile0
files reside in the same working
.SM
sourcefile1
as the input file
as the input file
4-11