Analog Devices VisualDSP++ 3.5 Manual page 82

Blackfin Processor Loader Guide
splitter utility is controlled by the LDF's
declared with
TYPE(RAM)
declared by
TYPE(ROM)
Figure 2-16 shows an example ROM splitter options pane of the Load
page. With the Enable ROM splitter box unchecked, only
ments are processed and all
elfloader utility. If the box is checked,
and
TYPE(ROM)
-romsplitter
-b
-width
Figure 2-16. ROM Splitter Pane
The Mask Address field masks all EPROM address bits above or equal to
the number specified. For example, Mask Address =
the bits above and including
2-52
are consumed by the loader utility, and segments
are consumed by the splitter.
TYPE(ROM
segments are processed by the splitter utility.
(ANDed by
A29
command. Segments
TYPE()
) segments are ignored by the
segments are ignored
TYPE(RAM)
29
0x1FFF FFFF
VisualDSP++ Loader Manual
for 16-Bit Processors
seg-
TYPE(RAM)
-maskaddr #
-o
(default) masks all
). Thus,