Analog Devices VisualDSP++ 3.5 Manual page 141

The switches on these command lines are as follows.
,
-pm -dm
Select program memory or data memory as the source in the exe-
cutable for extraction and placement into the image. Because these
are the only switches used to identify the memory source, the
sources are any PM or DM ROM memory segments. Because no
other contents switches appear on these command lines, the format
for the output defaults to Motorola S3 format, and the output
PROM width defaults to 8 bits for all PROMs.
,
pm_stuff dm_stuff
Specify names for the output files without file extension. Use dif-
ferent names so the output of the second run does not overwrite
the output of the first run. The output names are
and
dm_stuff.s_#
my_proj.dxe
Specify an executable file to process into a non-bootable
PROM-image file.
File Searches
Many splitter switches take a file name as an optional parameter.
Table 5-7 lists the type of files, names, and extensions that the splitter
expects on files. File searches are important in the splitter's process. The
splitter supports relative and absolute directory names, default directories,
and user-selected directories for file search paths.
When you provide an input or output file name as a command-line
parameter, use the guidelines stated
Splitter File Extensions
Table 5-7 lists and describes file types input and output by the splitter.
VisualDSP++ 3.5 Loader Manual
for 16-Bit Processors
ADSP-218x DSP Loader/Splitter
.
on page
pm_stuff.s_#
1-9.
5-17