File Searches; File Extensions - Analog Devices VisualDSP++ 3.5 Manual

ADSP-219x DSP Loader Guide
Example:
elfloader p0.dxe -proc ADSP-2191
In the above example, the loader runs with:
• —the name of the executable file to be processed into a
p0.dxe
boot-loadable file. The output file's name is
is not specified.
•
-proc ADSP-2191

File Searches

Many loader switches take a file name as an optional parameter.
on page 3-20 lists the expected file types. File searches are important in
the loader operation. The loader supports relative and absolute directory
names, default directories. File searches occur as described

File Extensions

Table 3-5 lists and describes file types input and output by the loader.
Table 3-5. File Extensions for ADSP-218x Loader Operation
File Extension Description
Executable files and boot-kernel files.
.DXE
Overlay memory files. The loader recognizes overlay memory files but does not
.OVL
expect these files on the command line. Place
the
the
Loader output file.
.LDR
3-20
—the target processor, ADSP-2191 DSP.
file that refers to them; the loader can locate them when processing
.DXE
file.
.BNM
because a name
p0.ldr
on page
files in the same directory as
.OVL
VisualDSP++ Loader Manual
for 16-Bit Processors
Table 3-5
1-9.