Using Base Loader - Analog Devices VisualDSP++ 3.5 Manual

Using Base Loader

The Load page of the Project Options dialog consists of multiple panes
and is the same and for all Blackfin processors. When you open the Load
page, the default loader settings (Loader options) for the selected proces-
sor are already set. As an example,
processor's default Load settings for PROM booting. Command-line
switches equivalent to the dialog box options are also identified. Refer to
"Command-Line Switches" on page 2-42
switches.
-b
-f
-baudrate
-waits
-holdtime
Figure 2-14. Base Load Page: Loader File Options Pane
VisualDSP++ Loader Manual
for 16-Bit Processors
Blackfin Processor Loader/Splitter
Figure 2-14 shows the ADSP-BF532
for more information on the
-p #
-width
-v
-init
-o
2-47