Adsp-2192 Dsp Loader Guide; Single-Processor Command Line - Analog Devices VisualDSP++ 3.5 Manual

ADSP-2192 DSP Loader Guide

ADSP-2192 DSP Loader Guide
This section provides reference information on the ADSP-2192 loader's
command-line interface.
When using the loader from within VisualDSP++, settings on the Load
page of the Project Options dialog box correspond to the loader's com-
mand-line switches. For more information, see the VisualDSP++ 3.5
User's Guide for 16-bit Processors or online Help.
A list of switches and a description of each appear in
mand-Line Switches" on page

Single-Processor Command Line

Use the following syntax for the loader's command line when there is only
one input executable (
elfloader -core0 sourcefile [-o outputfile] -proc ADSP-2192 [-switch...]
or
elfloader -core1 sourcefile [-o outputfile] -proc ADSP-2192 [-switch...]
where:
• ,
-core0
respectively. The loader makes up the array and structure names
according to the supplied core number.
•
sourcefile
A file name can include the drive and directory; enclose long file
name within straight-quotes, "long file name". Before running the
loader, ensure that all
directory as the executable. The loader automatically opens the
overlay and shared memory files to read in the data while process-
ing the executables.
4-10
4-13.
).
.DXE
—Specify that the sourcefile is for
-core1
—Identifies the input executable file (
.OVL
and files reside in the same working
.SM
VisualDSP++ Loader Manual
"Loader Com-
or
core0 core1
) to process.
.DXE
for 16-Bit Processors
,