Removing And Replacing The Cover; Figure 5-1 Removing The Cover - Sun Microsystems Sun Fire V60x Manual

5.4

Removing and Replacing the Cover

Many of the equipment replacement procedures require that you remove the chassis
cover. Before you remove the cover, observe the safety instructions in the section
titled "Safety: Before You Remove the Cover" on page 5-2
To remove the cover, follow these steps:
1. While pressing the blue latch button (A) with your left thumb, push down on the
top cover and slide it back using the heel of your right hand on the blue pad (see
Figure 5-1).
FIGURE 5-1
2. Set the cover aside and away from the immediate work area.
Note – A non-skid surface or a stop behind the chassis may be needed if attempting
to remove the top cover on a flat surface. Sliding the server chassis on a wooden
surface may mar the surface (there are no rubber feet on the bottom of the chassis).
A
Removing the Cover
Chapter 5 Maintaining the Server 5-3