Figure 5-12 Inserting The Processor; Figure 5-13 Closing The Socket Lever - Sun Microsystems Sun Fire V60x Manual

FIGURE 5-12
5. Verify that the processor sits flush and level on the socket.
6. Close the socket lever until it locks and secures the processor in the socket.
FIGURE 5-13
Caution – Move the socket lever slowly and make sure that it is engaged on the
locking tab on the side of the socket.
7. Orient the heatsink such that it properly and fully contacts the surface of the
processor beneath it.
8. Gently lower the heatsink in place being careful not to damage the thermal
interface material (TIM).
Caution – Misorientation of the heatsink will result in poor contact between
heatsink and processor. Not only will the processor overheat, but both processor and
socket may be damaged when securing the heatsink with the metal retention clips.
5-20 Sun Fire V60x and Sun Fire V65x Servers—Troubleshooting Guide • November 2003
Inserting the Processor
Closing the Socket Lever