Air Baffle; Sun Fire V60X Server Air Baffle Removal - Sun Microsystems Sun Fire V60x Manual

5.5.8 Air Baffle
This section explains how to remove and replace the air baffles for the servers.
Caution – Before touching or replacing any component inside the Sun Fire V60x
and Sun Fire V65x servers, disconnect all external cables and follow the instructions
in "Safety: Before You Remove the Cover" on page 5-2 and "Removing and
Replacing the Cover" on page 5-3. Always place the server on a grounded ESD pad
and wear a properly grounded antistatic wrist strap.
5.5.8.1 Sun Fire V60x Server Air Baffle Removal
Follow the steps in this section to remove the air baffle.
1. Before removing the cover to work inside the system, observe the safety
guidelines mentioned earlier.
2. Remove the chassis cover.
3. Gently lift the air baffle until pin (C) is free of the board mounting hole.
4. Remove the baffle from the chassis.
FIGURE 5-29
5-38 Sun Fire V60x and Sun Fire V65x Servers—Troubleshooting Guide • November 2003
2
A
C
Removing the Air Baffle
B