.
FIGURE 4-11
Note – When you select a boot device with the menu shown in Figure 4-11, it only
affects the current boot. Subsequent boots revert to the device stored in the BIOS
default settings.
4.5.2
Other Bootup Items
During the boot process, you will be presented with the choices described in the
following sections. Type "N" to keep the current information, "Y" to change the
information.
4.5.2.1
Ethernet Port Delay
Ethernet ports may take a short amount of time (less than 1second) to activate after
ifconfig brings them up. This has been noted when the Server is running Red Hat
Linux v7.2 or v7.3.
4.5.2.2
USB-Connected External CD-ROM Drives
Some USB-connected CD-ROM devices perform unreliably on the Sun Fire V60x
server and Sun Fire V65x server. Use the internal CD-ROM device when possible.
4-14
Sun Fire V60x and Sun Fire V65x Servers—Troubleshooting Guide • November 2003
Boot Device Selection Menu