Supported Processors; Heatsinks And Air Ducts; Processor Population Order; Table 1-2 Supported Processors And Heatsinks - Sun Microsystems Sun Fire V60x Manual

1.5.2

Supported Processors

The server main board supports the 2.8 and 3.06 GHz Intel® Xeon™ self-terminating
processors (see Table 1-2).
TABLE 1-2
Marketing Part Number
1.5.3

Heatsinks and Air Ducts

Boxed processors come with the appropriate heatsink and clear plastic air duct for
integration into the server. When installing a heatsink into the server, the heatsink
minus the fan should be used.
1.5.4

Processor Population Order

Processor 1 is the processor closest to the inside of the board and processor 2 is the
processor closer to the corner of the board (see Figure 5-10). The server board is
designed in such a way that it can boot from either processor. If the primary
processor fails to respond in a designated amount of time during POST, the
secondary processor is used to complete the boot-up sequence.
In the event of a single processor configuration, the board halts during the boot
process and displays a message indicating that it is forcing itself to boot from a
potentially bad processor and continues after the user has acknowledged the
message.
For normal operation, it is best if processor 1 is populated first and then processor 2;
however, in the event of a mistake or a failed processor, the server is able to
compensate.
Supported Processors and Heatsinks
Sun FG Part Number
595-6943-01
595-6944-01
Sun Description
2.8 GHz Processor with heatsink
3.06 GHz Processor with heatsink
Chapter 1 Troubleshooting Guidelines 1-7