Sun Fire V65X Server Air Baffle Removal; Sun Fire V65X Server Air Baffle Installation - Sun Microsystems Sun Fire V60x Manual

5.5.8.3 Sun Fire V65x Server Air Baffle Removal
To remove the air baffle, follow these steps:
1. Remove the blue thumbscrew holding the air baffle to the backplane board.
2. Lift the air baffle straight up, moving the SCSI cable out of the way.
FIGURE 5-31
5.5.8.4 Sun Fire V65x Server Air Baffle Installation
To replace the air baffle, follow these steps:
1. Slide the air baffle in place, ensuring that one tab is flat against the top of the
power supply and the other tab is resting on top of the backplane board.
2. Route the SCSI cable through the slot on the top of the air baffle.
3. Secure the air baffle to the backplane using the blue thumbscrew.
5-40 Sun Fire V60x and Sun Fire V65x Servers—Troubleshooting Guide • November 2003
Removing the Air Baffle