Setting Individual Forward No Answer Timers - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
move the cursor back to step 2
4.
Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program

3.15 SETTING INDIVIDUAL FORWARD NO ANSWER TIMERS

Each station can have an individual call Forward No Answer timer to accommodate station
users with different individual work habits. When adjusting this timer, take care that the
value is not greater than the transfer recall timer. The range is 001-255 seconds.
PROGRAM KEYS
KEYPAD
UP & DOWN
SPK/RLS
Open customer programming and follow the instructions below.
OPERATION
1.
Press TRSF 502
2.
Dial the station number (e.g., 205)
OR press UP or DOWN key to select the station and
press the right soft key
OR press ANS/RLS to select all stations
OR press the right soft key
3.
Enter the new value via the dial pad, e.g., 020 (must
be three digits) and the system will return to step 2
4.
Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
Used to set timer values.
Used to select extension number.
Save data and advance to next program.
3 - 14
System Administration and Special Features Guide
[201] NO ANS FWD
015 SEC ->_
[205] NO ANS FWD
015 SEC ->_
[ALL] NO ANS FWD
015 SEC-> _
[205] NO ANS FWD
015 SEC-> 020
February, 1999