Setting Your Answer Mode - Samsung iDCS 100 User Instructions

iDCS 100
TECHNICAL MANUAL

1.5 SETTING YOUR ANSWER MODE

Each keyset and add-on module (AOM) can have its answer mode for intercom calls
set to one of the following options:
RING—The station will ring in one of eight custom ring patterns. Calls are answered by
pressing the ANS/RLS key or lifting the handset.
AUTO—After giving a short attention tone, the station will automatically answer calls on
the speakerphone. When a C.O. line is transferred to a station in Auto Answer, the
screened portion of the call will be Auto Answer, but the keyset or AOM will ring when
the transfer is complete if the user has not pressed the ANS/RLS key or lifted the
handset.
VOICE—The station will not ring. After a short attention tone, callers can make an
annoucement. The called party must press the ANS/RLS key or lift the handset to
reply.
ACTION
1. Press the transfer key followed by 103
Display shows
2. Dial 0, 1 or 2 to change the ring mode, e.g., 2
OR
Press UP or DOWN to select the ring mode
3. Press the transfer key to store and exit
DISPLAY
[201] ANS MODE
RING MODE
[201] ANS MODE
VOICE ANNOUNCE
1.9
USER INSTRUCTIONS
PART 1 JUNE 2002
HOME
PAGE
Table of
Contents