Calling And Answering; Configuring Call Settings - Polycom VSX Series Administrator's Manual

Calling and Answering

Configuring Call Settings

The Call Settings screens provide access to high-level options for the entire
system. For convenience, some of the User Settings options are repeated on
these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Call Settings.
2. Configure these settings:
Setting Description
Maximum Time in Enter the maximum number of minutes allowed for call
Call length.
When that time has expired, you see a message asking you
if you want to hang up or stay in the call. If you do not answer
within one minute, the call automatically disconnects. If you
choose to stay in the call at this time, you will not be
prompted again.
Choosing 0 removes any limit.
Auto-Answer Specifies whether to answer incoming point-to-point calls
Point to Point automatically.
6
6 - 1