6. Locate the memory DIMM connectors and determine which DIMMs you want to
remove.
7. Remove the memory DIMMs by pushing the locking tabs out on the memory
connectors.
1
8. Install blank DIMM covers in the memory connector.
9. Install the memory riser card in the system unit. See "Installing a Memory Riser
Card or a One-Way Processor Card" on page 343 for more information.
10. Replace the processor and memory riser card cover as described in "Replacing
Processor and Memory Riser Card Cover" on page 315.
11. Replace the system unit covers as described in "Replacing Covers" on page 314.
(15) A
(16) A
(13) B
(14) B
(12) C
(11) C
(10) D
(9) D
(7) D
(8) D
(6) C
(5) C
(3) B
(4) B
(2) A
(1) A
2
Push Locking Tabs
Out to Release Memory
Module
Chapter 9. Removal and Replacement Procedures
1
347