Display Error Log; Remote Initial Program Load Setup - IBM F80 Service Manual

Display Error Log

A screen similar to the following displays when you select this option. You can view or
clear your system error log.
.--------------------------------------------------------.
|
|
|
|
| Entry 1. 99/06/30 02:15:35 25a80011
| Entry 2. 99/07/01 03:18:36 20300026
`--------------------------------------------------------'
.-----------------.
|C=Clear Error Log|
`-----------------'
Note: The time stamp in this error log is Coordinated Universal Time (UCT), which is

Remote Initial Program Load Setup

This option allows you to enable and set up the remote startup of your system. You
must first specify the network parameters as shown in the following screen:
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
===>
Note: Some applications may require that IP addresses contain leading zeroes for
Error Log
Date Time
also referred to as Greenwich Mean Time (GMT). The AIX error log has more
information available and time stamps with your local time.
numbers less than 100. For example, 129.132.4.20 may need to be entered as
129.132.004.020.
|
|
|
ErrorCode Location |
P1.1/Q1 |
P1.1/Q1 |
.-----------.
|X=Exit Log |
`-----------'
.------.
|X=Exit|
`------'
Chapter 8. Using System Management Services
299