Modem Configuration Sample Files; Sample File Modem_M0.Cfg - IBM F80 Service Manual

Modem Configuration Sample Files

Sample File modem_m0.cfg

#
# COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP: modem_m0
#
# FUNCTIONS: Modem configuration file specifically for IBM 7852-400
# modem with Auto-Reliable feature. This feature must be turned off
# for Catcher calls. This example uses the AT&F reset command to
# choose the factory defaults.
#
# (C) COPYRIGHT International Business Machines Corp. 1996
# All Rights Reserved
# Licensed Materials - Property of IBM
#
# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#
#
# The modem has configuration switches. They should be set to the
# factory default settings, except switches 11 and 12. These must be
# to UP ("AT" responses) and DOWN (Asynchronous operation), respectively.
ICDelay 1
DefaultTO 10
CallDelay 120
#
# %N Call-Out phone number
#
#
# PROGRAMMING NOTE: No blanks between double quote marks (").
condout:
connect:
"19\r" or "13\r" or "12\r" or "1\r" busy "7\r"
retry:
"19\r" or "13\r" or "12\r" or "1\r" busy "7\r"
disconnect:
%R Return phone number
send "AT&F&E2E0T\r"
ignore "0\r" or "OK\r\n" timeout 2 # Ignore modem response.
send "AT&E12&E14\r"
expect "0\r" or "OK\r\n" timeout 2 # Confirm commands successful.
send "AT&SF1&S0S9=1\r"
expect "0\r" or "OK\r\n" timeout 2 # Confirm commands successful.
send "ATV0S0=0\r"
expect "0\r" or "OK\r\n" timeout 2 # Confirm commands successful.
done
send "ATDT%N\r"
expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" or
timeout 60
done
send "A/"
expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" or
timeout 60
done
delay 2
# Reset to factory defaults
# Reliable mode
# Echo off
# Disable pacing
# Disable data compression
# DSR independent of CD
# Force DSR on.
# CD respond time=100ms
# Numeric response code
# Auto-Answer off
# Tone dialing command.
# %N from Call Home setup.
# Expect a connection response.
# Repeat the previous command.
# Expect a connection response.
# Separate from previous data.
Appendix D. Modem Configurations
407